Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to make meth
#1
Items

Here is a list of all the items from the mod and what you can do with them.

  • Aluminum. Sorry, Aluminium - Used in the Chemical Tank
  • Cyfluthrin - Used in the Chemical Tank
  • Chemical Glass - Used to store the chemicals you make
  • Methylamine - Used in the Chemical Tank
  • Cooking Pan - Used to make Intermediate Acid.
  • Cooking Pot - Used to make Phosphoric Acid.
  • Chemical Pot - Used to make Sulfuric Acid.
  • Red Phosphorus - Used in a Cooking Pot to make Phosphoric Acid.
  • Stove - Used with a Cooking PanCooking Pot and a Chemical Pot.
  • Chemical Tank - Used with all of the chemicals to produce the meth.
  • Water - Used with a Cooking Pot and a Chemical Pot.
  • Sulfur Trioxide Used in a Chemical Pot to make Sulfuric Acid

Step 1:
Buy the following Items (You will need them all)

1 Stove
1 Chemical Tank
1 Cooking Pan
1 Cooking Pot
1 Chemical Pot
3 Chemical Glasses
1/2 Barrels of Methylamine (1 barrel by default has 80 liters)
4/6 Boxes Aluminum (1 box by default has 2,500 grams)
1/3 Barrels of Cyfluthrin (1 barrel by default has 20 liters)
1 Box of Red Phosphorus (1 box by default has 2,500 grams)
1 Box of Sulfur Trioxide (1 box by default has 1,000 grams)
2/3 Jugs of water (1 jug by default has 8 liters)

Step 2:
Add the amount of aluminum that you wrote down into the Chemical Tank. (Use E to take out 250g of aluminum from the box (If the box has too much)).

Step 3:
Add the amount of Cyfluthrin that you wrote down into the Chemical Tank. (Check the "Controls" section of the guide to learn how)

Step 3:
Press "Start" on the Chemical Tank and use the "Open" button periodically to reduce the pressure if it gets to high.

Step 4:
Reduce the pressure on the Chemical Tank to around 35P.

Step 5:
Add the amount of Methylmine that you wrote down into the Chemical Tank (Check the "Controls" section of the guide to learn how)

Step 6:
Press "Start" on the Chemical Tank and use the "Open" button periodically to reduce the pressure if it gets to high.

Step 7:
Add the max amount of water into the Chemical Pot and the Cooking Pot

Step 8:
Turn on the gas for the orange pot and wait until it gets to 100 degrees. (Don't let it get higher then 150 or it will set on fire)

Step 9:
Add the Red Phosphorus to the pot and wait 60 seconds until it is ready (All while making sure that the temp of the pan is above 100 and lower then 150) (Press E on the box to remove 250g of Red Phosphorus)

Step 10:
Take a Chemical Glass and collect the Phosphoric Acid

Step 11:
Turn on the gas for the blue pot and wait until it gets to 400 degrees. (Don't let it get higher then 500 or it will set on fire)

Step 12:
Add the Sulfur Trioxide to the pot and wait 30 seconds until it is ready (All while making sure that the temp of the pan is above 400 and lower then 500) (Press E on the box to remove 250g of Sulfur Trioxide)

Step 13:
Take a Chemical Glass and collect the Sulfuric acid

Step 14:
Add both the Sulfuric acid and the Phosphoric Acid into the Cooking Pan. Then turn on the gas until the temp gets to around 150

Step 15:
Collect the Intermediate Acid from the pan.

Step 16:
Lower the pressure in the Chemical Tank to around 10

Step 17:
Add the amount of Intermediate Acid that you wrote down into the Chemical Tank

Step 18:
Press "Start" on the Chemical Tank and use the "Open" button periodically to reduce the pressure if it gets to high.


Forum Jump:


Users browsing this thread: 1 Guest(s)